How do you reset the oil life on a 2010 Ford Explorer?

How do you reset the oil life on a 2010 Ford Explorer?

Reset Oil Change Light

How do you reset the oil life on a 2008 Ford Explorer?

To reset the oil light in the 2008 Ford Explorer Sport Trac first turn the ignition to the ON position being sure not to start the engine. Press and hold the rest button located at the bottom left of the speedometer. The text on Your display will read “Oil Change set to 100%”.

How do I reset my oil change soon?

Turn the ignition off, wait a few moments, and then start the engine. Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.

How much oil does a 2011 Explorer take?

Capacity: 6 quarts (with filter)After refill check oil level.

How do you reset the oil change light on a 2012 Ford Explorer?

To reset the oil level warning or maintenance light in your 2012 ford explorer vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.

How do you reset the oil life on a 2006 Ford Explorer?

Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.

ALSO READ:  What are the words starting with Tele?

How do you reset the oil life on a 2013 Ford Explorer?

Turn the ignition to the “on” position, but do not start the engine. Use the directional pad on the steering wheel and scroll through the settings area under the heading menu. Go to Settings > Vehicle > Oil Life Reset. Push and hold OK until it resets to 100%

How many quarts does a 2013 Ford Explorer take?

6 quarts

What kind of oil filter does a 2014 Ford Explorer take?

Motorcraft ” Original Equipment Oil Filter (Part No. FL-500S)

How much oil does a 2014 Explorer take?

Capacity: 6 quarts. (with filter)After refill check oil level.

How many air filters does a 2015 Ford Explorer have?

two

Begin typing your search term above and press enter to search. Press ESC to cancel.

Leave a Comment