What do diagonal yellow stripes on the road mean?
Yellow lines indicate that they separate opposing lanes of traffic. The purpose of these painted islands is to create a buffer of space between two opposing lanes of traffic as there is a transition.
What do striped yellow lines mean?
YELLOW LINES mark the center of a two-way road used for two-way traffic. You may pass on a two-way road if the yellow centerline is broken. When a solid and a broken yellow line are together, you must not pass if you are driving next to the solid line. Two solid yellow lines mean no passing.
What do the different lines on roads mean?
White lane markings are the most common. Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. Yellow lines show you where traffic is going in different directions.
What do diagonal white lines on the road mean?
Areas of white diagonal stripes or chevrons painted on the road. These are to separate traffic lanes or to protect traffic turning right. If the area is bordered by a broken white line, you should not enter the area unless it is necessary and you can see that it is safe to do so.
What are the white lines along the Centre of the road called when they are long lines with a short gap?
Explanation: The centre of the road is usually marked by a broken white line, with lines that are shorter than the gaps. When the lines become longer than the gaps, this is a hazard warning line. Look well ahead for these, especially when you’re planning to overtake or turn off.
Which road users are most difficult to see when reversing?
Which road user will be especially hard to see? Explanation: As you look through the rear of your vehicle, you may not be able to see a child because of their height. Be aware of this before you reverse.
What is the line in the middle of the road called?
The middle of the road is usually called the median. The median strip or central reservation is the reserved area that separates opposing lanes of traffic on divided roadways, such as divided highways, dual carriageways, freeways, and motorways.
Why does this junction have a stop sign and a stop line on the road?
At this junction, there’s a ‘stop’ sign and a solid white line on the road surface. Explanation: If your view at a road junction is restricted, you must stop. There may also be a ‘stop’ sign. Don’t emerge until you’re sure no traffic is approaching.
A stop line is a wide white line painted across the street. When a crosswalk or limit line is not marked, stop at the corner. Check for traffic before crossing. Wait until it is safe before going forward.
When you arrive at an intersection with a stop sign in your direction?
If there is no traffic light but rather a 4-way stop, the first car to arrive at the intersection receives the right of way. It doesn’t matter where the vehicle is located or what direction it is traveling, this rule will always apply when someone has clearly arrived at the stop sign first.
Is a four-way stop a controlled intersection?
A four-way Four-way intersections are either controlled by stop signs or a traffic signal. At a four-way intersection controlled by a traffic signal, only proceed when you are presented with a green light. Only turn left on a green light when there is no approaching traffic.
Why are 4 way stop signs used?
The main reason for the use of stop signs at road junctions is safety. According to an international study of locations where the system is in use, all-way stop control applied to four-legged intersections may reduce accident occurrence by 45%.
What is a four-way intersection called?
A four-way intersection, or crossroads, usually involves a crossing over of two streets or roads. However, two roads may cross at a different angle. In a few cases, the junction of two road segments may be offset from each when reaching an intersection, even though both ends may be considered the same street.
Begin typing your search term above and press enter to search. Press ESC to cancel.