How do you turn off the change oil light on a 2002 Chevy Silverado?
For the 2002 silverado you just need to turn the ignition to the on position but do not start your vehicle. Press the gas pedal to the floor 3 times within 5 seconds and you should see the change oil message flash if done correctly.
How do I reset my 2002 Chevy Silverado?
To reset Your 2002 Chevy Silverado security system put the key in the ignition, turn the key to the on position, and leave it on until the security light goes out. Usually 15min. Once this happens crank the truck without turning the key backward, just turn to start.
How do you reset the security on a 2002 GMC Sierra?
Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON; the vehicle will not start. Observe the SECURITY telltale; after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds.
How do I reset my engine change?
Find the Reset Button and Turn On Vehicle System
What does the maintenance light mean?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.
Where is the trip meter reset button?
Reset all information in trip meter TM (i.e. mileage, average consumption, average speed and driving time) with a long press on the RESET button on the left-hand stalk switch.
Trip A and B are for measuring distance. You can reset them to Zero usually with a trip meter button, usually its the only button on your instrument cluster. eg Trip A might measure how far you travel on one tank of fuel. Trip B might measure distance between oil changes.
“Trip A” is a way of measuring the mileage you take on a short trip. If you push the button you should find that you have three settings (Mileage, “Trip A”, and “Trip B”) A short push of the button changes the setting.
What is Odo mode?
ODO is short for Odometer. That’s what the mileage reading that tells you how many miles the car has travelled is actually called ” its just a label to tell you that you have got the display set to “overall total mileage” and not one of the two trip mileage displays.
Begin typing your search term above and press enter to search. Press ESC to cancel.