What type of oil does a Dodge Caravan take?
Dodge Grand Caravan engine oil 5w-20 For new Dodge Grand Caravan cars, for cars with less than 75,000 miles, we recommend to use engine oil viscosity 5w-20, API SN, API SP specification.
What kind of oil does a 1995 Dodge Dakota take?
Engine Oil SAE 10W-30 is preferred. Capacity: 4 quarts. (with filter)After refill check oil level.
How many quarts of oil does a Dodge Caravan need?
5.9 quarts
What kind of oil does a 2011 Dodge Grand Caravan take?
Castrol Edge Synthetic Motor Oil 5W-30 5 Quart.
What type of oil does a 2010 Chrysler Town and Country use?
SAE 5W-20 Full Synthetic Motor Oil
What kind of oil does my Chrysler Town and Country use?
The 4.0L Chrysler Town & Country engine should specifically use a Chrysler MS-6395 oil specification and an oil viscosity of SAE 10W-30.
What kind of oil does a 2011 Chrysler Town and Country use?
Castrol ” EDGE® 5W-30 Full Synthetic Motor Oil 5 Quart (Part No. 1598B1)
How many quarts of oil does a Chrysler town and country take?
The Chrysler Town & Country with a 3.8L 6-cyl engine takes 5 quarts (with filter) of 5W-20 synthetic oil. A new oil filter and a crush washer are required.
How much oil does a 3.8 L v6 take?
Engine Oil 5 quarts. (with filter)After refill check oil level.
What kind of oil does a 2007 Chrysler Town and Country take?
Mobil 1 Advanced Synthetic Motor Oil 5W-20 5 Quart.
How many quarts of oil does a 2000 Chrysler Town and Country take?
4.2 quarts
How many quarts of oil does a 2001 Town and Country take?
5 quarts
What kind of oil does a 2008 Chrysler Town and Country use?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
How much transmission fluid does a 2008 Chrysler Town and Country need?
There are two transmissions that are listed for the 2008 Chrysler Town and Country. 62TE ” Requires 5.5 quarts for a drain(drop the pan) and refill. 41TE ” Requires 4 quarts for a drain(drop the pan) and refill. Once complete, check the transmission fluid level.
How much transmission fluid does a Chrysler town and country need?
A typical fluid change will require anywhere from 3 to 6 quarts of ATF depending on the application, a new filter and a pan gasket (or RTV sealer) for the transmission pan. The pan must be thoroughly cleaned prior to reinstallation.
Begin typing your search term above and press enter to search. Press ESC to cancel.